Outdoor Advertising LED Display - Outdoor Led Billboard Case:P4.81 Outdoor LED Screen

P4.81 Outdoor LED Billboard - Outdoor Advertising LED Display

The P4.81 outdoor LED billboard is a front-service aluminum cabinet advertising screen built for roadside and street advertising. With a 4.81 mm pixel pitch, 5,000 nits of brightness and IP65 protection, it keeps pictures sharp and readable in direct sunlight, heavy rain and high humidity - exactly the conditions this project had to survive in.

Customers and application scenarios:

Our client is an outdoor advertising operator in Solomon Islands, a South Pacific island nation where salt-laden air, high humidity and intense equatorial sunlight are a permanent challenge for any outdoor display. The client needed a roadside billboard to lease advertising space to local shops, brands and service providers, and set clear requirements before the order:

6 m x 2 m (12 sqm) of display area for a landscape advertising layout;
A outdoor led billboard screen steel structure to lift the screen above traffic;
Daylight-visible brightness, because the billboard faces the sun for most of the day;
Front maintenance, since the screen is mounted high and on-site access is limited;
Simple remote publishing so several advertisers can share one screen on different time slots.

Outdoor LED billboard: why it fits island outdoor advertising

12 sqm of pure advertising space: a 6 m x 2 m screen at 4.81 mm pitch resolves about 1,248 x 416 pixels, enough for high-resolution video, brand posters and scrolling text at a short-to-medium viewing distance.

Elevated viewing: the outdoor led screen center well above eye level, so the display stays visible over parked cars, roadside vegetation and pedestrians, and reads clearly from both directions of the road.

Tropical weather defence: aluminum cabinet, IP65 sealing, anti-corrosion surface treatment and waterproof connectors protect the screen from rain, salt spray and rapid temperature swings.

Low maintenance cost: front-service cabinets open directly from the front, so a technician can replace a module or power supply without scaffolding and without disassembling the steel structure - important for a remote island site.

Flexible advertising operation: a 4G/WiFi media player lets the owner schedule different advertisements for different hours, so one billboard can serve several paying advertisers.

HSCXLED P4.81 Outdoor LED Screen Solution:

After reviewing the site photos and the client's structure requirements, our engineering team proposed the P4.81 outdoor aluminum LED screen in a 6 m x 2 m configuration. The screen uses SMD1921 lamp beads on 500 x 250 mm modules ,Cabinet Size:1000 x 1000 mm,with a 1/13 scan, giving 43,264 dots per square meter. A refresh rate of at least 3,840 Hz keeps the picture flicker-free when filmed by phones and TV cameras, which matters for advertisers who shoot the billboard for social media.

The solution also includes waterproof power and data connectors, a lightning-protection design for the island's storm season, and a media player with remote publishing software. Cabinet weight is kept at or below 28 kg/sqm, so the Outdoor LED Screen and foundation could be sized economically without heavy civil work.

Project result:

The billboard was delivered as a complete package - screen cabinets, P4.81 Outdoor LED Display, control system and spare modules - and was installed on site in Solomon Islands. Once powered up, the 6 m x 2 m screen holds a stable 5,000-nit output that stays readable in full daylight, and the 3,840 Hz refresh keeps advertising videos clean when recorded by mobile phones.

During the island's rainy season the aluminum cabinets and IP65 sealing kept the screen working normally, with no moisture damage or module failure reported. Because cabinets are front-service, the client's local technician can now replace a single module in a few minutes without scaffolding or a crane - a decisive advantage on a remote island where service visits are expensive and slow.

The billboard is now used to rotate campaigns for several local advertisers, and the client is evaluating additional screens for other roadside positions in the capital area.

Looking for a outdoor LED display manufactures?

Shenzhen H&S Innovation Technology Co., Ltd. (HSCXLED) manufactures outdoor advertising LED displays from P2.5 to P10, with outdoor advertising,single-pole, double-column, wall-mount or trailer structures. Tell us your screen size, installation country and expected viewing distance, and our engineers will propose the pixel pitch, brightness and structure within 24 hours.

We are here for you.

Howard

Tel:

+86-134-2892-1577

Wechat:

+86+13428921577

email:

howard@hscxled.com

whatsapp:++86-134-2892-1577